Wall ties with L-shaped plug
Intended useThe wall ties are designed to provide fixing of a layer from masonry units and thermal ins insulation to various base materials.
DesignThe wall ties L-shaped plug consists of the following components:
- L-shaped plug from stainless steel;
- BFRP bar with uniform sand coating.
MarkingKGS 190-7-P, where:
KGS – wall tie with L-shaped plug,
190 – wall tie length, mm,
7 – bar diameter, mm,
P – sand coating of a bar.
T – insulation thickness, mm,
D – width of ventilated gap (if any), mm,
90 - minimal wall tie anchorage depth in facing layer, mm.
To fix a thermal insulating layer in walls with ventilated gap, a plastic restrainer should be used.
|Wall tie length|| |
|Bar diameter|| |
5 or 7 mm
|Length of connection between a plug and a wall tie (embedment depth)|| |
|L-shaped plug opening diameter|| |
|Bar tensile strength, not less than|| |
1 000 MPa
|Bar bending strength, not less than|| |
1 000 MPa
|Bond strength of 5 mm || 7 mm diameter wall tie with a bearing or facing layer material, not less than|| |
- Technical specifications “BFRP wall ties with L-shaped plug” TU 5714-017-13101102-2013.