THERMOSAVE faed dowel for render systems

Intended use

TERMOSAVE faced dowels are designed to provide fixing of a thermal insulating layer to various types of base material during installation of render systems, including those with thin coating.

Design

TERMOSAVE dowel consists of the following components:
  • anchor element plastic plug;
  • expansion element GFRP bar;
  • plate shaped element restrainer from impact and frost resistant plastics.

Marking

SDM 100-6, where:
SDM construction dowel for render systems;
100 dowel length, mm;
6 bar diameter, mm.




Technical characteristics

Dowel length

from 90 to 300 mm

Bar diameter

6 mm

Length of a plug anchoring section

45 mm

Plate-shaped element diameter

60 mm

Bar tensile strength, not less than

1 000 MPa

Bar bending strength, not less than

1 000 MPa

Dowel bending pull-out force from concrete B 25, solid brick, aerated concrete, not less than

160 / 140 / 100 N

  • THERMOSAVE faed dowel for render systems
  • THERMOSAVE faed dowel for render systems
  • THERMOSAVE faed dowel for render systems
  • THERMOSAVE faed dowel for render systems

Regulatory documents

  • Technical specifications Construction hammered-in dowels TERMOSAVE TU 2296-024-13101102-2014;
  • Certificate of composite No. RU.A31.H15718;
  • Technical Approval TS 4835-16;
  • Certificate of conformity of the production control No.1301-CPR-1178.


Contacts

+7 (495) 668-09-53,
+7 (8352) 24-25-90, 24-25-92
sales@galencomposite.com
info@galencomposite.com


Send a request



Implemented Projects